Clockwise down.
1 click = 8.5mm @ 25m.
Clockwise right.
1 click = 5mm @ 25m.
1. Remove screw A.
2. Withdraw barrel forward, as per arrow B.
3. Check that spring C is in its upper position.
4. Push the new set into place.
5. Secure screw A.
NOTE: Always check the rubber pad D is in its place.
When changing from 22LR or 32 S&W Long to 22 Short the trigger lever (E) must be lowered. Before inserting the new set pull the lever outward and downward and secure the pin (F) in its lower hole. When using calibres 22LR and 32 S&W Long insert the pin into the upper hole.
When changing calibres the trigger spring (C) can be adjusted by turning screw K. Clockwise reduces trigger weight.
For fine adjustment of trigger weight use screw L. Loosen the screw by giving it one turn anti clockwise. Push upwards to increase the pressure. After adjustment, secure the screw.
Sear engagement is adjusted by screw M. Clockwise to reduce engagement.
Turn screw N clockwise to increase free travel.
Screw P under trigger guard.