Elevation: Turn screw 2 clockwise to lower fall of shot.
Windage: Turn screw 3 clockwise to move right.
- #4 is the interchangeable rear sight blade.
- #5 is the rear sight position adjustment rail (allowing for change in sight radius).
- #6 is the Martini falling block action.
Trigger Weight: To adjust trigger weight, slide 3 forward to reduce weight and rearwards to increase.
Sear Engagement: Cock trigger by pressing down on lever 6 until it clicks. Then turn screw 4 anti-clockwise until sear releases. Then turn one quarter turn clockwise. Sear engagement is now set.
Trigger Shoe Position: Loosen screw 5, position trigger shoe as required, then retighten screw 5.
To open breech, lift up on lever 1 while at the same time pushing down on lever 2.
To close breech, move lever 2 back to original position.
